SUBLZT Instruction Manual

SUBLZT

Power ON/OFF & Controls

The SUBLZT utilises a magnetic twist switch to turn the torch on and off. This switch is red in colour and located on the base of the torch.

The torch has a 500 lumens LED and a built-in green laser. To activate the torch, from the OFF position;

Counterclockwise turn of the switch activates the green laser.

Clockwise turn to the first notch - Max power LED.

Clockwise turn to the second notch - Low power LED.

Clockwise turn to the third notch - SOS flash.

Batteries & Charging 

All SUBNOX batteries may be charged via USB-C directly. 

A charging LED is built onto the battery management system. 

RED - Charging GREEN - Fully Charged

Battery Cautions

DO NOT charge batteries unattended.

DO NOT attempt to open the torch or video light if the torch or your hands are wet.

DO NOT use batteries that appear damaged or have corroded contacts.

ALWAYS use high quality chargers and USB-C cables.   

To remove the battery for charging, unscrew the light head and slide the battery out from the body. 

Care & Maintenance

Always soak the SUBLZT in fresh water after use. While soaking in fresh clean water, turn the power control ring a few times to ensure all the salt water is flushed out.

Wipe dry the SUBLZT after soaking to prevent water marks from forming on the body or the glass surface.

Accessories

A BCD clip on mount for the SUBLZT is available as a separately sold accessory. 

CAUTIONS

DO NOT point the green laser of the SUBLZT at aircraft or vehicles.

DO NOT point the green laser of the SUBLZT directly into eyes or at children.